Version 2.2.0

March 26, 2023: FreqEZ Band Decoder v2.2.0 released to general availability

Click HERE to read the announcement and instructions for existing users.

I. FreqEZ v2.2.0 Windows Console:

Standard Windows setup program:

Download and unzip this ZIP archive. Then run the setup executable:

2. FreqEZ v2.2.0 Raspberry Pi Controller – Two methods:

Burn microSD Disk Method (RECOMMENDED):

A complete FreqEZ Controller software installation can be created using the Raspberry Pi organization’s Imager program ( https://www.raspberrypi.com/software/ ) to burn this image file to a microSD card. The resulting microSD will contain both the Raspbian operating system and pre-configured FreqEZ RPi software. When finished, just insert the microSD card into the RPI and apply power. Step-by-step instructions can be found in the “Raspberry Pi Controller – Preparing the microSD Card” section of the documentation by clicking on Help in the v2.2.0 Windows Console or opening the on-line Help file in >Downloads >Version 2.2.0 “FreqEZhelp.dbf”.

Manual File Copy Method (ALTERNATE):

The files in this FreqEZ RPi Controller ZIP archive can be downloaded and manually copied to specific locations within the Raspberry Pi file structure. Step-by-step instructions can be found in the “APPENDIX: Alternative Method for Preparing the microSD Card” section of the documentation by clicking on Help in the v2.2.0 Windows Console or opening the on-line Help file in >Downloads >Version 2.2.0 “FreqEZhelp.dbf”.


FreqEZ v2.2.0 Help PDF file

Comments are closed.